Ridgid Portable Table Saw R4510 Review

Why buying a Ridgid portable table saw is a good idea. Find Ridgid R4510 table saw features, pros and cons collected from consumer and professional reviews.

Ridgid R4510 Features Review

Ridgid R4510

Ridgid table saw, R4510 is a 10 inch heavy duty saw that features 15 Amp motor and 4000 RPM, sufficient in power for tough cutting jobs. R4510 motor is made with ball bearings and incorporates a soft start feature for smooth startup and to protect the motor from the excessive wearing.

Ridgid portable table saw, R4510 includes features found on the high quality portable table saws Bosch, Makita or DEWALT; such as the rip fence with the locking level to guide the workpiece, anti-kickback pawls to prevent or reduce the possibility of kickback and miter gauge with positive stops at 0 and 45 degrees. Miter gauge is also used to align the cutting material for a cross cutting and provides greater accuracy in angled cuts.

Easy to adjust

Height and bevel adjusting handwheel raises or lowers the blade while bevel angles are locked with the bevel locking lever located under the worktable surface. Bevel scale used to show the exact blade angle is easy to read and conveniently installed at the front of this portable table saw.

Tool free blade guard assembly allows quick change and easy installation. Recommendation is to remove the guard only for non-through cuts and keep the guard down over the blade for through sawing cuts. A metal piece found on the blade guard assembly, a spreader, is used to keep the kerf open and prevent the kickback.

Versatile

Ridgid portable table saw is a versatile unit suitable for ripping and cross cut operations; it can do several basic cuts by using the miter gauge: the cross cut, the rip cut, miter cut, bevel cross cut, bevel rip cut and bevel miter cut. Ridgid R4510 is also suitable for non-through cut, such as grooves, rabbets and dadoes.

Ridgid R4510 introduces the micro-adjust wheel, found on the rip fence for fine, one-hand adjustments.

The Retract-A-Rip fence and rail maintain rip dimension accuracy to the blade, and provide 25-inch rip capacity while maintaining portability.

If you need more space on the work table, use the table extension to increase the length by releasing the lock lever. One thing you should know is that you cannot extend the table if the rip fence is locked on the table rails.

Ridgid portable table saw R4510 has a removable riving knife that can be set to two different heights and a split blade guard for bevel cuts.

Ridgid R4510 weighs approximately 122 pounds, which is a more than the main competitor Bosch 4100-09 model.

Advantages and Disadvantages

Listed pros and cons for Ridgid portable table saw, R4510 are the collection of many consumer and professional reviews found online; on the websites such as Amazon.com, epinions.com, consumersearch.com, Home Depot and buzzillions.com.

Pros

Ridgid R4510 is very similar to the 2410LS but with upgraded safety features so it can compete better with Bosch 4100.
R4510 portable table saw is sturdy enough to handle ripping without tipping.
Tool-less table insert makes the blade replacement easier.
Easy setup; it takes maximum 15 minutes to put the rip fence, miter gauge, blade guard on the saw and other components.
Gravity rise stand and collapsible design make this unit great for storage, as it is easy to fold and unfold the unit.
Cheaper than Bosch 4100, DEWALT and Makita portable table saws.
Easy to move all parts around and make blade adjustment.
Work table is wide enough and it expands to 25" by simply lifting the lever, pull the table out and lock the lever back down. The table on R4510 has an ideal height which allows easy cutting without bending or stretching.
The rip fence and the blade are factory aligned so R4510 saw is ready to use right out of the box; some small adjustments are off course needed.
It can cut easily through the pine, maple, oak, logs, but it is a bit slower when cutting hardwoods. It is great for both professionals and DIY handymen.
Ridgid R4510 table is truly portable, with its collapsible design and large strong wheels for better mobility in rough terrain.
Built-in ruler for the rip fence automatically extends with the table extension.
Lifetime service warranty to the original buyer.

Cons

Motor is noisy during the startup and there is a visible wobble on the arbor.
Heavier than Bosch and DEWALT, making it harder to lift.
ON-OFF power switch is not conveniently located.
Several complaints that the blade is made of a low quality material.
Arbor runout is not held within a tolerable tolerance, which causes the blade to deflect sideways, and results in rougher cuts, burning the wood, and random slightly inaccurate cuts.
Expensive motor component.
Measuring tape for the fence is cheap and just isn't going to last.

The conclusion is that many consumers were pleasantly surprised with the R4510 quality, which they get for much cheaper price than Bosch. You can buy Ridgid portable table saw, R4510 model, online or from Home Depot, for example, for approximately $500, which is a better price than Bosch 4100, and it comes with a lifetime warranty.